Dimensional Tolerance Testing for Precision Machined Parts from China

When inspection finds defects, the response protocol matters. First, separate defective from good units. Second, photograph and document each defect type with measurements. Third, notify the factory immediately and pause affected production lines. Fourth, agree on a rework plan and timeline. Fifth, re-inspect after rework before accepting. Don't let the factory rush you — proper corrective action at this stage prevents repeat issues.

The most common quality problems I've seen across thousands of inspections are: (1) dimensional deviation — products not matching spec measurements, (2) color variation — especially between sample and bulk, (3) surface defects — scratches, dents, rust, (4) packaging damage — inadequate protection, wrong materials, (5) mix of good and defective units in the same carton. A solid QC plan addresses all five.

The cost of quality follows the 1-10-100 rule. A defect caught at design costs $1 to fix. Caught during production, it costs $10. Caught after shipment, it costs $100 or more. This is why pre-production inspection is the highest ROI quality activity. Spending $400 on PPI for a $20,000 order is a 2% investment that protects the remaining 98%. Most importers underinvest in early-stage quality and pay for it later.